S.No |
Faculty Name/Corresponding Author |
Title |
Name of Journal |
ISSN NO |
Indexing |
Impact Factor /SNIP |
Publisher |
1 |
Dr. Ashish Kumar Srivastava |
Study of surface integrity and effect of process parameters in wire electrical discharge turning of Ti-6Al-4V |
Indian Journal of Engineering & Materials Sciences |
0975-1017 |
SCI |
Impact Factor:
0.543 |
NISCAIR |
2 |
Dr. Shashi Prakash Dwivedi, Ambuj Saxena |
Extraction of collagen powder from chrome containing leather waste and its composites with alumina employing different casting techniques |
Materials Chemistry and Physics |
ISSN: 0254-0584 |
SCI |
Impact Factor:
2.78 |
ELSEVIER |
3 |
Dr. Shashi Prakash Dwivedi |
Utilization of RHA in Development of Green Composite Material using RSM |
Journal of the Mechanical Behavior of Materials |
2191-0243 |
SCOPUS |
SJR:
0.1 |
De Gruyter |
4 |
Dr. Shashi Prakash Dwivedi |
Physical, Mechanical and Thermal Behaviour of Recycled Agro Waste GSA Reinforced Green Composite Materials |
Materials Testing |
0025-5300 |
SCI |
Impact Factor:
0.521 |
Hanser elibrary |
5 |
Abhishek Sharma |
Development of mahua oil as a lubricant additive and its tribological characteristics |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
6 |
Nagendra Kumar Maurya, Ashish kumar Srivastava, Shashi Prakash Dwivedi, Sandeep Chauhan |
Investigation of mechanical properties of Al6061/SiC composite prepared through stir casting technique |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
7 |
Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Rohit Sahu, Avdhesh Tyagi, Rajesh Maurya |
Microstructure and Mechanical Behaviour of Al/SiC/Al2O3 Hybrid Metal Matrix Composite |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
8 |
Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Nagenndra Kumar Maurya |
Experimental Observation of Elements of surface integrity during conventional turning of commercial pure titanium |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
9 |
Dr. Shashi Prakash Dwivedi |
Utilization of RHA in Development of Hybrid
Composite by Electromagnetic Stir Casting Technique using RSM |
Journal of Metals, Materials and
Minerals |
2630-0508 |
SCOPUS |
SJR:
0.1 |
Chulalongkorn University |
10 |
Abhishek Sharma, Nagendra Kumar maurya |
Effect of design parameters on performance and emissions of DI diesel engine running on biodiesel-diesel blends: Taguchi and utility theory |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
11 |
Dr. Shashi Prakash Dwivedi |
Extraction of Collagen from Leather Waste to Develop Aluminium Based Metal Matrix Composite |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
12 |
Dr. Ashish Kumar Srivastava |
Assessment of mechanical properties and EDM machinability on Al6063/SiC MMC produced by stir casting |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
13 |
Dr. Shashi Prakash Dwivedi |
Development of Copper Based Composite by Stir Casting Technique |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
14 |
Shashi Prakash Dwivedi, Rohit Sahu, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Avdhesh Tyagi, Rajesh Kumar Maurya |
Machining and thermal behaviour of thermal power plant waste
reinforced composite material |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
15 |
Ashish Kumar Srivastava, Shashi Prakash Dwivedi, |
Experimental study on hardness and fatigue behavior in joining of AA5083 and AA6063 by friction stir welding |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
16 |
Dr. Ashish Gupta |
Determination of residual stresses for helical compression spring
through Debye-Scherrer ring method |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
17 |
Dr. Shashi Prakash Dwivedi |
Development of Bio-composite Material by Utilizing Chrome Containing Leather Waste with Al2O3 Ceramic Particles |
Materials Research Express |
2053-1591 |
SCI |
Impact Factor:
1.449 |
IOP Publishing |
18 |
Dr. Shashi Prakash Dwivedi |
Microstructure and Mechanical Behaviour of Al/B4C Metal Matrix Composite |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
19 |
Dr. Ambuj Saxena |
Constitutive Modelling of high temperature Flow Stress of Armor Steel in Ballistic Applications: A Comparative study |
Journal of Materials Engineering and Performance |
1059-9495 |
SCI |
Impact Factor:
1.476 |
Springer |
20 |
Mr. Nagendra Kumar Maurya |
Process parameters, development and applicationsof stir casted composite: A review |
Materials Testing |
0025-5300 |
SCI |
Impact Factor:
0.521 |
Hanser elibrary |
21 |
Dr. Abhishek Sharma |
Experimental evaluation of the friction and wear of jojoba oil withaluminium oxide (Al2O3) nanoparticles as an additive |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
22 |
Dr. Abhishek Sharma and Shivam Mishra |
Friction and wear behavior of jojoba oil based biolubricant-Taguchi method approach |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
23 |
Mr. rajesh kumar maurya |
An Experimental Analysis of Process Parameters for EN-36C Alloy Steel Using CNC Lathe- A Review |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
24 |
Mr. Nagendra Kumar Maurya |
Effect of SiC Reinforced Particle Parameters in the Development
of Aluminium Based Metal Matrix Composite |
Evergreen - |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
25 |
Dr. Shashi Prakash Dwivedi |
Fabricating Copper-Based Composite by using Waste Steel Chips and TiB2 Reinforcement Material |
Clay Research |
|
SCOPUS |
SJR: 0.116 |
The Clay Minerals Society of India (CMSI) |
26 |
Mr. Nagendra Kumar Maurya |
Experimental and computational investigation on mechanical
properties of reinforced additive manufactured component |
Evergreen - |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
27 |
Dr. Abhishek Sharma |
Development of bio-based lubricant from modified desert date oil (balanites aegyptiaca) with copper nanoparticles addition and their tribological analysis |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
28 |
Dr. Sivam Mishra,
Dr. Abhishek Sharma |
Response surface methodology based optimization of air-film blade cooled gas turbine cycle for thermal performance prediction |
Applied Thermal Engineering |
1359-4311 |
SCI |
Impact Factor:
4.026 |
Elsevier |
29 |
Dr. V. R. Mishra |
Utilization of Waste Saw Dust in Development of Epoxy Resin Hybrid Green Composite |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
30 |
Shashi Prakash Dwivedi |
Utilization of Waste Saw Dust from Wood Industry in Development of Glass Fiber Epoxy Resin Hybrid Green Composite Material |
Annales de Chimie - Science des Matériaux |
1958-5934 |
SCOPUS |
SNIP:
0.387 |
IIETA |
31 |
Shashi Prakash Dwivedi, Nagendra Kumar Maurya |
Assessment of Hardness on AA2014/Eggshell Composite Produced Via
Electromagnetic Stir casting Method |
Evergreen - |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
32 |
Shashi Prakash Dwivedi |
Effect of MgO addition on the Physical, Mechanical and Thermal Behaviour of Al/ Si3N4 Composite using Hybrid Casting Technique |
Journal of Ceramic Processing Research |
1229-9162 |
SCI |
Impact Factor:
0.327 |
Hanyang University Press, Korea |
33 |
Shashi Prakash Dwivedi, Rohit Sahu |
Effects of SiC Particles Parameters on the Corrosion Protection of Aluminium based Metal Matrix Composites using Response Surface Methodology |
Jordan Journal of Mechanical and Industrial Engineering |
1995-6665 |
SCOPUS |
SJR:
0.34 |
Hashemite University
Deanship of Scientific Research and Graduate Studies |
34 |
Shashi Prakash Dwivedi |
Formation of Functionally Graded Hybrid Composite Materials with Al2O3 and RHA Reinforcements using Friction Stir Process |
Australian Journal of Mechanical Engineering |
2204-2253 |
SCOPUS |
SJR:
0.17 |
Taylor and Francis |
35 |
Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Rohit Sahu |
Microstructure and Mechanical Behaviour of Al/SiC/Agro-waste RHA Hybrid Metal Matrix Composite |
Revue des Composites et des Matériaux Avancés |
1169-7954 |
SCOPUS |
SNIP:
0.436 |
IIETA |
36 |
Abhishek Sharma |
Sustainability of Aluminium Oxide Nanoparticles Blended Mahua Biodiesel to the Direct Injection Diesel Engine Performance and Emission Analysis |
Pollution |
2383-4501 |
SCOPUS |
|
N/A |
37 |
Mr. Nagendra Kumar Maurya |
Comparative study and measurement of form errors for the component printed by FDM and polyjet process |
Instrumentation Mesure Metrologie |
2269-8485 |
SCOPUS |
Impact per Paper (SNIP): 0.928 |
IIETA |
38 |
Abhishek Sharma |
Diesel engine performance and emission analysis running on jojoba biodiesel using intelligent hybrid prediction techniques |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
39 |
Dr. Vinod Kumar Yadav |
Two-Dimesional Analysis of tapered heat flux banner for measuring laminar burning velocity |
ENERGY SOURCE: PART A |
1556-7230 |
SCI |
Impact Factor:
0.55 |
Taylor and Francis |
40 |
Dr. Abhishek Sharma |
Development of the Ethyl Ester from Jatropa Oil through Response Surface Methodology Approach |
Pollution |
2383-4501 |
SCOPUS |
|
N/A |
41 |
Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya |
Microstructure and Mechanical Properties of Al 6061/Al2O3/Fly-Ash Composite Fabricated Through Stir Casting |
Annales de Chimie - Science des Matériaux |
1958-5934 |
SCOPUS |
SNIP:
0.387 |
IIETA |
42 |
Abhishek Sharma, Avdhesh Tyagi |
Sustainability of the polanga biodiesel blends during the application to the diesel engine performance and emission parameters—Taguchi and RSM approach |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
1806-3691 |
SCI |
Impact Factor:
1.743 |
Springer |
43 |
Shashi Prakash Dwivedi |
Synthesis and Characterization of Ball-Milled Eggshell and Al2O3 Reinforced Hybrid Green Composite Material |
Journal of Metals, Materials and Minerals |
2630-0508 |
SCOPUS |
SJR:
0.1 |
Chulalongkorn University |
44 |
Shashi Prakash Dwivedi |
Physical, Mechanical and Thermal Behaviour of High Entropy Materials |
Annales de Chimie - Science des Matériaux |
1958-5934 |
SCOPUS |
SNIP:
0.387 |
IIETA |
45 |
Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Nagendra Kumar Maurya |
3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI |
EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
46 |
Shashi Prakash Dwivedi, Ashish Kumar Srivastava |
Utilization of Chrome Containing Leather Waste in Development of Aluminium Based Green Composite Material |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING–GREEN TECHNOLOGY |
2198-0810 |
SCI |
Impact Factor:
4.57 |
SPRINGER |
47 |
Rohit Sahu |
Comparative study of Mechanical Properties of Dry and Water Aged Jute/Flax/Epoxy Hybrid Composite |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
48 |
Shashi Prakash Dwivedi |
Machining Characteristics of Titanium Ti-6Al-4V, Inconel 718
and Tool Steel – A Critical Review |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
49 |
Abhishek
Sharma |
Review on Biodiesel Production and Emission Characteristic of Non-Edible Vegetable Oil |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
50 |
Abhishek
Sharma |
Performance and Emission Characteristics of Combined
Biodiesel Blend of Non-Edible Oil in Diesel Engine |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
51 |
Abhishek
Sharma |
Study of Performance and Emission Characteristics of Non-
Edible Biodiesel as a Sustainable Fuel in Diesel Engine |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
52 |
Sandeep Chauhan, Ashish Gupta |
A study on buckling of piezoelectric circular cylindrical shell |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
53 |
S S Chauhan |
Fabrication and Testing of Plastic Sand Bricks |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
54 |
Anuj Gupta |
The Study of Parametric Factor in Attic Space for
Winter Season |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
55 |
Neeraj Kumar, Abhishek Tyagi, Tapan Yadav, Om Prakash, Vinay
Singh, Sumit Tiwari |
Heat Transfer Analysis of Flat Plate Air Collector |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
56 |
Ashish Kumar Srivastava |
Metal matrix composites- a review on synthesis and
characterization |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
57 |
Mukesh Mishra, Pradeep Kumar |
Experimental Lumped Analysis of Different Solid Geometries |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
58 |
Abhishek
Sharma |
A Review on Performance and Emission of CI Engine using
Exhaust gas recirculation (EGR) |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
59 |
Satish Chand |
An adaptive multipopulation genetic algorithm for the
optimization of active magnetic bearings |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
60 |
Vishal Shankar Srivastava, Rishikesh Kumar Singh |
Conceptual Investigation of Renewable Energy for
Desalination Purposes |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
61 |
Shashi Prakash Dwivedi |
Development of Green Hybrid Metal Matrix Composite using
Agricultural Waste Bagasse as Reinforcement- A Review |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
62 |
S S Chauhan |
Kinematic and kinetic analysis of knee joint during squatting |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
63 |
Aditya Verma, Shubham kr. Jha, Ramesh Chandra Verma, Naresh
Kumar, Rajiv Ranjan, Sumit Tiwari, |
Investigation of Automatic Solar Irrigation Model |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
64 |
Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Nagendra Kumar Maurya, Shivam Mishra |
Development of duralumin alloy and its microstructural characterization by using grain refiner |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
65 |
K K Singh, H Bahri , H Singh and J Singh |
A review of “performance analysis and optimization of car air spoilers’’ |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
66 |
Shivam Mishra |
Slurry erosion: An overview |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
67 |
Shivam Mishra |
A Review on Design and Development of Free Piston Linear Generators in Hybrid Vehicles |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
68 |
Shivam Mishra |
An overview of diagnostics and prognostics of rotating machines for timely maintenance intervention |
IOP Conference Series: Materials Science and Engineering |
1757-899X |
SCOPUS |
SNIP:
0.573 |
IOP Publishing |
69 |
Ambuj Saxena, Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Mauryaa |
Experimental and Computational Investigation on Dynamic Fracture Toughness (J1d) Behavior of Multi-Pass SMA Armor Steel weldments |
Theoretical and Applied Fracture Mechanics |
ISSN: 0167-8442 |
SCI |
Impact Factor:
2.84 |
ELSEVIER |
70 |
Shashi Prakash Dwivedi |
Utilization of Recycled Hazardous Waste Bagasse as Reinforcement to Develop Green Composite Material |
World Journal of Engineering |
ISSN:1708-5284 |
SCOPUS |
SJR:0.15 |
Emrald |
71 |
Nagendra Kumar Maurya |
An Overview of Mechanical Properties and Form Error for Rapid Prototyping |
CIRP Journal of Manufacturing Science and Technology |
ISSN:1755-5817 |
SCI |
2.33 |
ELSEVIER |
72 |
Rajesh Maurya, Nagendra Maurya, Shashi Prakash Dwivedi |
Development of a System to Control Flow of Coolant in Turning Operation |
Journal of Mechanical Engineering |
ISSN: 1823-5514 |
SCOPUS |
SJR:0.15 |
n/a |
73 |
Shashi Prakash Dwivedi |
Effect of ball-milled MgO and Si3N4 addition on the
physical, mechanical and thermal behaviour of
aluminium based composite developed by hybrid
casting technique |
International Journal of Cast Metals Research |
ISSN: 1364-0461 (Print) 1743-1336 (Online) |
SCI |
Impact Factor:
0.978 |
Taylor and Francis |
74 |
Shashi Prakash Dwivedi, Manish Maurya, Nagendra Kumar Maurya1, Ashish Kumar Srivastava, Ambuj Saxena |
Utilization of Groundnut Shell as Reinforcement in Development of Aluminum Based Composite to Reduce Environment Pollution: a review |
Evergreen - |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
75 |
Abhishek Sharma |
Sal biodiesel production using Indian abundant forest feedstock |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
76 |
Abhishek Sharma |
Effective utilization of tobacco (Nicotiana Tabaccum) for biodiesel production and its application on diesel engine using response surface methodology approach |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
77 |
Shashi Prakash Dwivedi |
Mechanical behavior of AA2024/SiC AMCs |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
78 |
Shashi Prakash Dwivedi |
Metallurgical and mechanical description of AA2014/Al2O3 reinforced composites |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
79 |
Ambuj Saxena, , Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Mahesh Pandey |
Experimental and Numerical Investigation of Quasi-Static (10−3 s−1)
Fracture Behavior of Armor Steel |
Arabian Journal for Science and Engineering |
1319-8025 |
SCI |
Impact Factor:
1.518 |
Springer |
80 |
Shashi Prakash Dwivedi |
Microstructural and mechanical behavior of aluminium alloy reinforced with TiC |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
81 |
Shashi Prakash Dwivedi |
Wear characteristics of AA2014/10?wt% Al2O3 reinforced AMCs |
Materials Today: proceeding |
2214-7853 |
SCOPUS |
SNIP:
0.837 |
Elsevier |
82 |
Ambuj Saxena, Shashi Prakash Dwivedi, Ashish
Kumar Srivastava & Nagendra Kumar Maurya |
Influence of SD effect on Johnson–Cook hardening
constitutive material model: Numerical and
experimental investigation for armor steel |
Mechanics of Advanced Materials and Structures |
1537-6532 |
SCI |
Impact Factor:
2.873 |
Taylor and Francis |
83 |
Shashi Prakash Dwivedi |
Identification of Microwave Radiation Effect on Copper Welded Joint with Brass as Filler Material Using Response Surface Methodology |
Materials Performance and Characterization |
2165-3992 |
SCOPUS |
SJR: 0.3 |
ASTM |
84 |
Shashi Prakash Dwivedi, Ambuj Saxena |
Utilization of Waste Spent Alumina Catalyst and Agro-Waste RHA as Reinforcement Materials with Scrap Aluminium alloy Wheel Matrix |
Journal of Process Mechanical Engineering
(imeche-part E) |
09544089 |
SCI |
Impact Factor:
1.126 |
Sage |
85 |
KaushalendraKumar Singh |
Comparative energy, exergy and economic analysis of a cascade refrigeration system incorporated with flash tank (HTC) and a flash intercooler with indirect subcooler (LTC) using natural refrigerant couples |
Sustainable Energy Technologies and Assessments |
ISSN: 2213-1388 |
SCI |
Impact Factor:
3.456 |
ELSEVIER |
86 |
Abhishek Sharma |
Experimental investigation and statistical modeling of air-assisted
EDM of Al–SiC composite with an improvised tool |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
1806-3691 |
SCI |
Impact Factor:
1.743 |
Springer |
87 |
Abhishek Sharma |
Performance and emission characteristics of the diesel engine
running on neem (Azadirachta indica) biodiesel with effect of
exhaust gas recirculation at optimum injection strategies |
Pollution |
2383-4501 |
SCOPUS |
|
N/A |
88 |
Ashish Gupta |
Effect of distributed damping on the dynamic behaviour of flexible chasis of heavy road vehicle under standardized random road response |
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering |
2364
-1835 |
SCI |
Impact Factor:
0.727 |
Springer |
89 |
Ashish Gupta |
Experimental investigation of
fatigue failure in an ASTM A401
compression spring of a
passenger car |
Materials Testing |
0025-5300 |
SCI |
Impact Factor:
0.521 |
Hanser elibrary |
90 |
Nagendra Kumar Maurya |
Fabrication of Prototype Connecting rod
of PLA plastic material using FDM
Prototype Technology |
Indian Journal of Engineering and Materials Sciences |
0975-1017 |
SCI |
Impact Factor:
0.543 |
NISCAIR |
91 |
Abhishek Sharma |
Experimental investigation of the behaviour of a DI diesel engine fuelled with biodiesel/diesel blends having effect of raw biogas at different operating responses |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |
92 |
Shailendra Singh Chauhan |
Structural analysis of a Four-bar linkage mechanism of
Prosthetic knee joint using Finite Element Method |
Evergreen - |
2432-5953 |
SCOPUS |
SJR:
0.22 |
Joint Journal of Novel Carbon Resource Sciences & Green Asia
Strategy |
93 |
Abhishek Sharma |
EFFECTS OF CuO/WATER NANOFLUID APPLICATION ON THERMAL PERFORMANCE OF MESH WICK HEAT PIPE |
Heat Transfer Research |
2162-6561 |
SCI |
Impact Factor:
1.199 |
BEGELL HOUSE |
94 |
Abhishek Sharma |
Effect of SiC nanoparticles concentration on novel feedstock Moringa Oleifera chemically treated with neopentylglycol and their trobological behavior |
Fuel |
0016-2361 |
SCI |
Impact Factor:
5.128 |
Elsevier |